Apeks DST + XTX 50 DIN + XTX 40 OCTO SET

680,00 

Noudettavissa 6 pv / kodin toimitettuna 9 pv

KASAA OMA REGULAATTORISETTISI!

  • Lisää painemittari? *

  • Lisää BCD/wingin letku? *

  • Lisää kuivapuvun täyttöletku? *

Tuotteen hinta yht.

Vaihtoehdot yht

Yhteensä

Osasto:

Kuvaus

Apeks XTX 50 DIN 1st stage + XTX 50 + XTX 40 OCTO SET

This popular regulator set has four medium-pressure ports all mounted on a rotating turret for optimal hose routing.

Two exhaust tees included — a large exhaust tee for minimal bubble interference (essential for underwater photography), and a narrow exhaust tee for a more compact, comfortable regulator.

Optional 5th port is available for sidemount or twin cylinder set ups.

Can be converted from a right-handed hose configuration to left-handed.

Suitable for cold water use.

 

Perussetti sisältää DST ykkösvaiheen, ATX50 toisen vaiheen ja ATX40 octon. Regulaattorin toisen vaiheen ja octon letkut kuuluvat aina setteihin. Täydellinen setti sisältää myös painemittarin HP-letkulla ja BCD/wingin täyttöletkun. Lisää myös kuivapuvun täyttöletku tarvittaessa.

Suosittelemme Scubapron compact SPG painemittaria (sisältää 80cm letkun). Tyypilliset täyttöletkut: BCD/wingille 65cm, kuivapuvun letku 90cm ( 74 cm, jos olet pienikokoinen). Harkitse myös ScubaPro regulaattori- ja tietokonepusseja suojaamaan regulaattoriasi kuljetuksen yhteydessä sekä säilytyksessä.

Klikkaa ‘ilmainen asennus’ ja asennamme ja testaamme setin ennen kuin lähetämme sen sinulle. Huolto saatavilla DiveHardilta (myös postilla).

 

First Stage DST:

  • Unique over-balanced, diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
  • 2 HP ports and 4 MP ports are angled for optimum hose routing
  • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out

 

Second Stage XTX50:

  • Pneumatically-balanced second stage results in smooth, easy breathing
  • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc.
  • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
  • Easy-to-grip opening effort control knob keeps the diver in control
  • The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
  • A silicone exhaust valve improves the breathing performance of the regulator
  • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water

 

OCTOPUS XTX 40:

  • The XTX40 Octopus pairs nicely to any Apeks regulator. It provides the same features and performance as the XTX40 second stage mentioned previously but comes with a high visibility yellow front cover and a 36″ yellow hose.
  • This product qualifies for Free Parts for Life
  • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc.
  • Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure MUST only be performed by an APEKS Authorized Service Technician.
  • Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
  • Suitable for coldwater use
  • Compatible with EAN40 out of the box
  • Pneumatically-balanced second stage results in smooth, easy breathing
  • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
  • The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
  • A silicone exhaust valve improves the breathing performance of the regulator
  • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water

 

 

 

 

Lisätiedot

Paino 2,5 kg (kilogramma)
Mitat 30 × 25 × 30 cm (senttimetri)
ScubaPro Compact SPG

Ei, Kyllä

Saatat myös pitää...